RÄDER-VOGEL® Casters & Wheels
Since 1946, RÄDER-VOGEL® has been producing wheels and castors. These products - often special products to solve customer specific problems - proved to be of superior quality in industrial applications.
RÄDER-VOGEL® is one of the leading manufacturers of VULKOLLAN® wheels and castors in the world.
Strict checks in all stages of production and intensive product testing under arduous conditions guarantee the high quality of their products now and in future.

More than 30,000 different wheels and castors for all areas of application.

Product Information PDFs:
Selection Criteria for Wheels and Casters
Bearings
Swivel Sections
Product Information and Symbols

 

Rader-Vogel Casters and Wheels
Rader-Vogel Pevopur Casters and Wheels PEVOPUR® Wheels
PEVOPUR® is a high quality polyurethane elastomer. It is – same as VULKOLLAN® - also produced with a hot casting method and – contrary to so-called cold cast systems – subjected to a subsequent heat treatment.
Among its outstanding mechanical and chemical characteristics count high dynamic load capacity, high elasticity, good compression set and resistance to a multitude of chemical media. Compared to rubber, the load capacity of PEVOPUR® is many times higher. Moreover, it is non-marking.
PEVOPUR® is particularly suitable for applications with a lower requirement profi le, e.g. manually operated transport equipment (up to 8 km/h).
Download the PDF below for more information on PEVOPUR®, including:
• PEVOPUR® wheels for industrial trucks
• PEVOPUR® press-on tyres, heavy-duty wheels and castors
• PEVOSOFT®
Download PEVOPUR® PDF

Back to Top

Rader-Vogel Vulkollan-Pevopur Casters and Wheels VULKOLLAN® / PEVOPUR® Casters & Wheels
VULKOLLAN® wheels are suited best for moving and driving loads up to 10 t and more. We produce VULKOLLAN® wheels with diameters up to 920 mm.
For in-plant transport of medium loads PEVOPUR® wheels are suitable as well.
Depending on the type of construction swivel housings are produced with different high quality bearings in the forkhead. All swivel housings are available with locking devices (e. g. ALLSTOP).
Download VULKOLLAN® / REVOPUR® PDF

Back to Top

Rader-Vogel Tractothan Casters and Wheels TRACTOTHAN® Wheels
TRACTOTHAN® is a VULKOLLAN® composite material developed and patented by us and featuring the same characteristics as VULKOLLAN®. In the new production process designed by us, special TPU granules are integrated into the tread, thereby enhancing the wheel grip and lowering the risk of sliding.
Thus TRACTOTHAN® improves the starting properties, reduces slip and boosts the braking effect.
Consequently, TRACTOTHAN® is mainly used for vehicles for in-plant transportation on wet and soiled floors.
Download the PDF below for more information on TRACTOTHAN®, including:
• TRACTOTHAN® wheels for industrial trucks
Download TRACTOTHAN® PDF

Back to Top

Rader-Vogel Pevolon Casters and Wheels PEVOLON® Casters & Wheels
PEVOLON® is a thermoplast on the base of polyamide. PEVOLON® wheels have a high abrasion resistance, a low coefficient of friction, a high load capacity and a long service life.
The accurate production of swivel and fixed castor housings guarantees functionality. Compact locking devices ensure permanent and safe locking in all applications.
The dimensions comply with the standards established by the European manufacturers of castors.
Download PEVOLON® PDF

Back to Top

Rader-Vogel Pevolastic-Pevothan Casters and Wheels PEVOLASTIC® / PEVOTHAN® Casters & Wheels
PEVOLASTIC® and PEVOTHAN® are two high quality thermoplastic polyurethane (TPU) elastomers. They have excellent properties for wheels, e.g. high load capacity, high abrasion resistance, good damping and they leave no traces.
The accurate production of swivel and fixed castor housings guarantees maximum functionality. Compact locking devices ensure permanent and safe locking in all applications. The dimensions correspond to the standards established by the European manufacturers of castors.
Download PEVOLASTIC® / PEVOTHAN® PDF

Back to Top

Rader-Vogel Rubber Wheels and Casters Rubber® Casters & Wheels
Different rubber types and wheel center materials determine the fields of application of these wheel series.
RÄDER-VOGEL® produces light solid rubber wheels with plastic centers as well as high quality welded steel constructions with SUPER-ELASTIC tires for highest demands.
The accurate production of swivel and fixed castor housings guarantees functionality. Compact locking devices ensure permanent and safe locking in all applications. The dimensions correspond to the standards established by the European manufacturers of castors.
Download Rubber Wheels PDF

Back to Top

Stainless Steel Casters
Rader-Vogel Stainless Steel Casters Stainless Steel Casters
RÄDER-VOGEL® produces stainless steel castors with treads in PEVOLON® and PEVOTHAN®, especially developed for wet atmospheres.
The RV-INOX castors fitted with total locking device (ALLSTOP) meet the safety requirements in the food industry, environmental technology and large-scale catering establishments and canteens.
This program of stainless steel castors is available for a load capacity range from 60 to 750 kg.
Download Stainless Steel PDF

Back to Top

Institutional Casters
Rader-Vogel Institutional Casters and Wheels Institutional Casters & Wheels
RÄDER-VOGEL's extensive range of institutional castors completes their castor program for in-plant transportation.
The high-quality materials used guarantee a long service life.
Various methods of fixing allow for flexible mounting.
Download Institutional Casters PDF

Back to Top

Guide Rollers

Rader-Vogel Special Rollers and Ball Units

Special Rollers, Ball Units
Special rollers are manufactured with diameters ranging from 30 to 85 mm and load capacities from 10 to 490 kg. The bearings are sealed on both sides and are moulded into PEVOLON® or PEVOTHAN®. Special VULKOLLAN® rollers with roller body made of steel, direct bonded tread and with force-fitted or caulked deep groove ball bearings are produced with diameters ranging from 40 to 125 mm and load capacities from 55 to 335 kg. Ball units with housings made of bright zinced steel and stainless steel with load capacities from 10 to 4.000 kg are available for different fields of application.
Download Special Rollers / Ball Units.pdf

Back to Top

Rader Vogel Flanged Groove Wheels

Rader-Vogel Flanged Grooved Wheels

Flanged Grooved Wheels
RÄDER-VOGEL® produces a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities as standard products, these wheels being made of high quality materials (PEVOLON®, steel C45 and grey cast iron).
Due to RÄDER-VOGEL's efficient plastics processing department, their own mould making and modern CNC lathes they are able to produce according to your specifications and drawings at a favorable price.
Download Flanged Grooved Wheels PDF

Back to Top

Pallet Rollers

Rader-Vogel Pallet Rollers

Pallet Rollers
RÄDER-VOGEL® offers one of the largest ranges of pallet rollers in Europe. For most of the standard electric narrow aisle and industrial trucks as well as for hand pallet trucks we produce VULKOLLAN®, PEVOPUR® and PEVOLON® pallet rollers.
According to the application requested different sealing systems made of zinced steel or polyamide ensure an additional protection of the ball bearings and guarantee a long service life.
For fast-moving narrow aisle and industrial trucks we offer special types of pallet rollers.
Download Pallet Rollers PDF

Back to Top

Press-On Tires

Rader-Vogel Press-On Tires

Press-On Tires
RÄDER-VOGEL® produces one of the largest ranges of VULKOLLAN® and PEVOPUR® tires. Most of the standard metric and inch dimensions are in stock or can be supplied within a short period of time.
Cylindrical steel band tires are produced as standard products with diameters ranging from 100 mm to 920 mm and load capacities up to more than 10 t.
In order to ensure a better pressing on of the steel band tires the inner ring is turned out and produced with slightly smaller dimensions than the specified ones for rims with fit h11.
Download Press-On Tires PDF

Back to Top

Rader Vogel Wheels for Industrial Trucks

Rader-Vogel Wheels for Industrial Trucks

Wheels for Industrial Trucks
RÄDER-VOGEL® produces wheels for industrial trucks including:
• Load Wheels
• Drive Wheels
• Press-on Tires
Contact Acorn™ for products that meet your specific requirements (800-523-5474).
Download Wheels for Industrial Trucks PDF

Back to Top

Rader Vogel Stabilizing Casters

Rader-Vogel Stabilizing Casters

Stabilizing Casters
RÄDER-VOGEL® produces stabilizing casters including:
• Spring-Loaded Stabilizing Castors
• Doppelt / Twin Wheel Stabilizing Castors
Contact Acorn™ for products that meet your specific requirements (800-523-5474).
Download Stabilizing Casters PDF

Back to Top

Rader Vogel Stabilizing Custom Made Products

Rader-Vogel Custom Made Products

Custom Made Products
Many applications place high demands on wheels and castors where standard products cannot be used, due to:
• Heavy loads
• High speeds
• Powerful acceleration
• Specific requirements on reliability and service life
• Difficult floor and temperature conditions
• Continuous use
• Difficult mounting situation
• Predefined construction dimensions etc.
Contact Acorn™ for products that meet your specific requirements (800-523-5474).
Download Custom Made Products PDF

Back to Top


Acorn Industrial Products Co  |  520 Hertzog Boulevard  |  King of Prussia, PA 19406
Phone 800-523-5474  |  Fax 800-782-6780  |  E-Mail acorn@acornindprod.com