Machinery Installation Accessories
Acorn™ stocks a wide variety of mounts, accessories and grout and provides coordination and field application assistance utilizing professional engineering experience to ensure proper mounts and isolation systems.
Acorn™ stocks a wide variety of mounts, accessories and grout and provides coordination and field application assistance utilizing professional engineering experience to ensure proper mounts and isolation systems.
Contact Acorn™ for a complete catalog on vibration control and machinery applications.
Click on the links below to navigate down the page:
• Machinery Mounts
• Anchoring Alignment
• Vibration Isolation Pads
• Foundation Isolation
• Novibra® Anti-Vibration Mounts
 |
Quantum PM™ Press Mounts • Reduce installation costs • Easy leveling and fast, accurate alignment • Control shock and vibration • Eliminate press "walking" • Increase die life and decrease press wear • Minimize expensive downtime and unnecessary maintenance • Achieve better press productivity • Rugged high strength mount construction • All elastomeric isolation pad configurations Quantum PM™ Press Mounts PDF |
 |
Quantum IM™ Press Mounts • Rugged ductile housing • Super heavy duty impact plate • Resilient anti-walk isolation pad • High strength steel adjustment bolt • Constant horizontal natural frequency Quantum PM™ Press Mounts PDF |
 |
LEVEL-RITE® Mounts • LEVEL-RITE® Mounts for hollow base machines (shown) Designed for hollow base installations of certain models of knee mills and shop machines. • LR-Series™ LR-Series™ mounts are perfectly suited for general-purpose machine leveling and isolation usage. • LR-200™ and LR-500™ Light duty leveling and isolation mounts for shop fixtures, tables and equipment. • R-Series™ Machinery mount with free floating leveling screw for all types of equipment. • U-Series™ Isolated mounting for machines that have their own leveling hardware. Replaces steel puck feet. Mounts PDF |
 |
LEV-L-INE® Machinery Mounts • Floor line may be sloped, but machine line is level • Easily accessible, true verical leveling adjustment • Patented aligning disc assures intimate contact and equal distribution of weight over entire bearing surfaces • Mating surfaces are matched to provide quick, easy and permanent leveling • Anchor bolt clearance hole permits bolting machine to floor • Machined base option available Mounts PDF |
IMW™ Mounts: For injection molding and die casting machines are three piece wedge mounts that offer true vertical lift with enough adjustment range to meet the demands of most applications. |
|
 |
Tri-Wedge® Machinery Mounts: Heavy duty machinery mount system that allows for multiple height adjustments and is designed for industrial machine tools that require in-place alignment and leveling. • Heavy duty machinery mount system • Two height ranges in one mount • Optional nitrile butyl rubber pads provide vibration isolation • In-place alignment and leveling • Patent-pending mount and pad design Mounts PDF |
 |
Vector® Bolts Made from high quality forged steel, VECTOR® Bolts have a series of angular facets which resolve vertical stress forces into a cone-shaped pressure pattern. An advantage of this unique design is the increased contact area between the bolt and the grout. The wedge shaped design on the bottom of the bolt transfers the tensile load of the stud into a lateral compressional load in the foundation, assuring maximum pull out strengths. VECTOR® Bolts are available in several metric diameters and lengths in a 90,000 psi minimum tensile strength material. Anchors PDF |
 |
Heavy Duty Jakebolts® Constructed entirely of steel, the Heavy Duty JAKEBOLTS® are tough, durable, and MIG welded watertight to prevent contamination of internal components during installation. Each JAKEBOLT® comes supplied with a centralizing bushing which doubles as a seal and protects against contamination during grouting. Anchor studs can be adjusted to project above the floor from 0 to 6" or 0 to 12", depending on the bolt specified for the installation. The entire internal anchor assembly can be adjusted laterally as well as vertically to compensate for normal construction variances in both hole location and machine foot thickness. The Heavy Duty JAKEBOLT® incorporates 90,000 psi tensile strength steel in the bolts. Anchors PDF |
 |
Capsule Anchor System™ Capsule Anchors™ offer tremendous holding power which is stronger than the concrete itself. A graded blend of quartz aggregate transfers the pullout forces into the concrete. Since there are no expansive forces from the anchors, they can be placed near foundation edges, chip troughs, coolant trenches or wireways. High anchor to concrete strengths are developed, allowing smaller anchor holes and studs than what is possible with conventional expanding anchor type systems. Anchors PDF |
 |
Fixator® Systems Machine tools installed and aligned on FIXATOR® Anchoring and Alignment Systems operate at maximum design efficiency. FIXATOR® Systems have been carefully designed to provide optimum performance and ease of installation, even in the most demanding of circumstances. Fixators PDF |
 |
RK™ Fixator® System Makes support critical machinery installations fast and easy. The most rigid machine to foundation connection available. Fixators PDF |
 |
AKII™ Agile® Fixator® System Intended for use in anchorless or anchored applications and offers the capability to be quickly converted from one to the other without disturbing or removing the machine base. Fixators PDF |
 |
DS™ Fixator® System A free standing leveling jack for machinery that requires a large leveling range. Fixators PDF |
 |
MS™ Fixator® System For vertical and lateral alignment and anchoring of electric motors, pumps, compressors, and other applications. Fixators PDF |
 |
S™ Fixator® System Complements the RK™ FIXATOR® System, ideal for floor plates where leveling must be accomplished from above. Fixators PDF |
 |
Red-Line® Pads and Red-Line® Anchor Pads Natural wool or synthetic felt in a variety of densities and thicknesses. Optional nylon bonded surface provides a high coefficient of friction to prevent machinery from creeping and "walking". Vibration Dampening PDF |
 |
Titan™ Shock Pads A tough, textile and neoprene laminated pad for installations with extreme loadings or heavy impact. Vibration Dampening PDF |
 |
Standard Washers Precut Red-Line® Pad and Titan™ Pad washers in standard sizes for use with anchoring hardware. Vibration Dampening PDF |
 |
Neoprene Pads Available in multiple thickness and hardness ranges, provide isolation for light duty or sanitary installations. Vibration Dampening PDF |
 |
Die Turnover™ Pads Simple and reliable resilient floor system for die handling areas. Complete and ready to install, requiring no maintenance. Vibration Dampening PDF |
 |
Regufoam™ Regufoam™ is applied as a vibration isolating structural element in the installation of both source and sensitive equipment. Regufoam installations provide a cost effective and simple approach to preventing the transmission of structure borne noise and vibration. |
 |
GK™ Low Frequency Foundation Blocks The GK™ Low Frequency Foundation Block is specifically used for isolating equipment where low interfering frequencies are encountered. They are typically used under concrete foundations supporting either source or sensitive machines. The highly specialized rubber compounds used, unique geometrical shape and carefully controlled load deflection characteristics make the GK block an excellent lower cost alternative to installations normally required to reach system natural frequencies as low as 4 Hz. GK™ Blocks are available in load ratings from 4,000 to 18,000 lbs. |
 |
RD™ Isolation System The RD™ Isolation System offers natural frequencies down to 1.5 Hz, is cast into concrete inertia block, uses variable and replaceable isolator units, simplifies construction, and can be leveled after construction. |
 |
IB-500™ Inertia Block Foundation Isolation Materials IB-500™ Inertia Block Isolation Materials offer superior performance because they have been specifically engineered to provide optimum compression rates for the inertia block while using standard foundation construction techniques. These products are unaffected by oils, coolants, cutting fluids and other liquids normally found in the industrial environment. IB-500™ Inertia Block Isolation Materials are conservatively rated, providing a life expectancy which typically exceeds that of the machinery being installed. The materials are manufactured in two densities: A less dense material, designated IB-500-S2, is used to isolate sidewalls of the inertia block; A more dense material, IB-500-B1, is applied to the base surface of the foundation (usually two layers). Both materials are manufactured in 1/2" thick sheets and are used in layers where greater thickness is desired. |
 |
RA™ Shielded Cup Mount |
 |
RAEM™ Shielded Cup Mount |
 |
SAW™ Heavy Mount |
 |
M™ Rubber Cup Mount |
Mount Products
• Machinery Mounts
• Anchoring Alignment
• Vibration Isolation Pads
• Foundation Isolation
• Novibra® Anti-Vibration Mounts
• Machinery Mounts
• Anchoring Alignment
• Vibration Isolation Pads
• Foundation Isolation
• Novibra® Anti-Vibration Mounts
Acorn Industrial Products Co | 520 Hertzog Boulevard | King of Prussia, PA 19406
Phone 800-523-5474 | Fax 800-782-6780 | E-Mail acorn@acornindprod.com
Phone 800-523-5474 | Fax 800-782-6780 | E-Mail acorn@acornindprod.com