CS Series
Central System, High Efficiency

CS Series Dust Collectors:
Central System, High Efficiency
by Cincinnati Fan
• Much higher filtration efficiency than any single
stage designs.
• Quiet operation.
• Powerful, self-cleaning, cast aluminum, radial blade
blower wheels.
• 10 gauge steel blower housing.
• Rugged, angle iron, steel support structure.
• Filter bag for 300CS and 500CS is 99% efficient at 5
micron. Filter bag for 750CS is 99% efficient at 1
micron.
• Blower / motor assembly is assembled before
shipment. Angle frame must be assembled by user.
CS Models:
• Model 300CS 3 HP motor / cotton sateen dust bag
• Model 500CS 5 HP motor / cotton sateen dust bag
• Model 750CS 7-1/2 HP motor / acrylic coated polyester felt dust bag
Cincinnati Dust Collector PDF

CYC Series
Cyclone Dust Collector

CYC Series Cyclone Dust Collectors
by AER Control Systems
• Dust storage capacities from 7.5 cu. feet- 40 cu. feet
• Capacities from 800 CFM to 13,000 CFM
• Heavy duty construction Long collector life
• Tapered cone design
• Hig constant efficiency for large particulates
• No internal moving parts
• Reduced maintenance
• Various sizes and configurations
• Wide range of capacities to meet application requirements
• Radial blade material handling fan
• Delivers peak airflow with the lowest horsepower
• Small footprint Saves valuable floor space
CYC Models:
• Model CYC-162 3 HP motor
• Model CYC-203 3 HP motor
• Model CYC-205 5 HP motor
• Model CYC-247 7-1/2 HP motor
• Model CYC-2410 10 HP motor
• Model CYC-3010 10 HP motor
• Model CYC-3015 15 HP motor
• Model CYC-3620 20 HP motor
• Model CYC-3625 25 HP motor
• Model CYC-4030 30 HP motor
• Model CYC-4040 40 HP motor
• Model CYC-4440 40 HP motor
• Model CYC-4450 50 HP motor
CYC Series Spec Sheet PDF
CYC Series Service Manual PDF

Dust-Master:
33S, 50S, 75S

Dust-Master:
100S, 150S, 200S

Dust-Master Portable Dust Collector
by Cincinnati Fan (made in the USA)

Models 33S, 50S and 75S:
Heavy duty, molded PVC drum lid. Fits any container with a 193/4"-201⁄2" diameter such as 30 gallon galvanized garbage can or 30-35 gallon steel or fire resistant fiber drum. Plastic drums are not recommended.
• Model 33S 1/3 HP motor / cotton sateen dust bag
• Model 50S 1/2 HP motor / cotton sateen dust bag
• Model 75S 3/4 HP motor / cotton sateen dust bag
Cincinnati Dust Collector PDF

Models 100S, 150S and 200S:
Heavy duty, molded, fiberglass reinforced epoxy drum lid. Fits any container with a 23"-24" diameter such as 55 gallon steel or foil lined fiber drum. Fiber drums should be able to support the unit weight. Plastic drums are not recommended.
• Model 100S 1 HP motor / knit polyester dust bag
• Model 150S 1-1/2 HP motor / knit polyester dust bag
• Model 200S 2 HP motor / knit polyester dust bag
Cincinnati Dust Collector PDF

Model 300S:
• Same lid as supplied on models 100S - 200S.
• Shipped with inlet hose and filter bag connection kit. Oversized after filter bag must be ordered separately. Consult Acorn™ for filter bag sizes and fabric selection.
• Model 300S 3 HP motor / over-sized bag
Cincinnati Dust Collector PDF

SPC Small Portable Fume Exhauster
by AER Control Systems
• 1000 or 2000 Nominal CFM @ 5.5 inches of static pressure
• Single-phase 1.5 HP or three-phase 3 HP TEFC motor with switch, cord on 1.5 HP only
• Direct drive backward inclined airfoil non-overloading fan
• 177 or 295 square feet of filter area providing filter efficiency of 99% at 0.5 microns
• 80/20 Polyester Blend flame retardent HEPA-like cartridge filter
• Internal baffle protecting cartridge filter
• Manual push button pulse-jet filter cleaning system
• Easy tool-less filter change-out
• Mini-helic filter change-out guage
• Dust collection drawer
• 6- or 8-inch by 10-foot externally supported extraction arm
• 10-inch rear wheels and 5 inch front swivel wheels
• 11- and 14-guage heavy duty metal construction
• Kelly Green industrialized textured powder coat finish
SPC Models:
• Model SPC-1000 1-1/2 HP motor
• Model SPC-1200 1-1/2 HP motor
• Model SPC-2000 3 HP motor
• Model SPC-2500 3 HP motor
SPC Spec Sheet PDF
SPC Service Manual PDF

Wall Mount Fume Collector (WFC-1000)

Wall Mount Fume Collector (WFC-1000)
by AER Control Systems
• Standard Airflow 1000 CFM using a 1.0 horsepower single phase TEFC motor.
• Remote Power cord and switch
• Baffled Inlet for Sparks
• Three stages of filtration
• 6” inlet for extraction arm
• Heavy duty construction with Kelly Green industrial textured powder coat finish
• Direct drive backward inclined airfoil non-overloading fan
• Mini-helic filter change-out guage
• Mounting Bracket

EBR Models:
EBR-50, EBR-75, EBR-100, EBR-150 and EBR-200

EBM Models:
EBM-25, EBM-75
and EBM-100

Portable Fume Exhausters:
Portable Blowers
by Cincinnati Fan
All models come standard with continuous duty (not duty rated), TEFC motors. Explosion Proof (EXP) motors are available for most models. The spark resistant feature of our Fume Exhauster-Blowers, with EXP motors, is a requirement for explosive environments. All units are self-contained with 10 feet of hose and intake nozzle. A unique feature to EBR and EBM Exhauster-Blowers is that the hose will fit on either the inlet or outlet of each model to exhaust fumes or blow fresh air. They can be mounted stationary to a table, wall or beam or they can be carried (or mounted on a dolly) as portable units for where ever needed. The ¼ to 1 horsepower, 1 Phase, 60 Cycle, models (with TEFC motors) also include an 8 foot cord, 3 prong grounded plug and switch pre-wired for 115 Volt.
EBR Models:
EBR models are standard with spark resistant, self-cleaning, cast aluminum, radial wheels and steel blower housings. AMCA Type B spark resistant.
• EBR-50 1/2 HP motor / 14 gauge steel housing
• EBR-75 3/4 HP motor / 14 gauge steel housing
• EBR-100 1 HP motor / 14 gauge steel housing
• EBR-150 1-1/2 HP motor / 14 gauge steel housing
• EBR-200 2 HP motor / 14 gauge steel housing
Cincinnati Fume Exhauster PDF
EBM Models:
EBR models are standard with spark resistant, self-cleaning, cast aluminum, radial wheels and steel blower housings. EBM models have multi-vane, forward curve wheels and cast aluminum blower housings. AMCA Type C spark resistant.
• EBM-25 1/4 HP motor / cast aluminum housing
• EBM-75 3/4 HP motor / cast aluminum housing
• EBM-100 1 HP motor / cast aluminum housing
Cincinnati Fume Exhauster PDF

DownDraft Bench
SPCB-1000

Small Portable Cartridge DownDraft Bench SPCB-1000
by AER Control Systems
• Direct drive forward curved blower with a 1.5HP TEFC motor delivering 1000 CFM
• 115/220 volt single phase with power cord and plug
• Pull-out dust drawer with a holding capacity of 0.9 cubic feet
• Bubble gasket seal on blower and filter access doors
• 177 square feet of filter area providing HEPA-like filter efficiency of 99% at 0.5 microns
• 80/20 Polyester Blend flame-retardent HEPA-like cartridge filter
• Internal baffle protecting cartridge filter
• Manual push button pulse-jet filter cleaning system
• Easy tool-less filter change-out
• Mini-helic filter change-out guage
• 10-inch rear wheels and 5 inch front swivel wheels
• 11- and 14-guage heavy duty metal construction
• Kelly Green industrialized textured powder coat finish
• Built-in sound attenuator
• Table Top is of aluminum construction with 3/4" Holes
• Wrap Around body with swing-open doors to enclose part on table
• Table top velocity is 250 FPM
SPCB Spec Sheet PDF

Powered DownDraft Bench
APB Series

Powered DownDraft Bench (APB) Series
by AER Control Systems
• Airflows range from 2500 to 5050 CFM depending on table top size and motor horsepower.
• 99% filter efficiency at 0.5 microns particulate size
• Heavy duty galvanized grating table top and rear wall with hinged sides are standard.
• Direct drive backward inclined airfoil non-overloading fan.
• Manual push button filter cleaning system
• Mini-helic filter change-out guage.
• High capacity dust drawer
• 11 and 14 guage heavy duty metal construction
• Kelly Green industrial textured powder coat finish.
• Manual Motor starter
APB Models:
• Model APB4250 3 HP motor
• Model APB4276 5 HP motor
• Model APB48102 7-1/2 HP motor
AER Powered Bench Spec Sheet PDF

Remote DownDraft Bench

Remote DownDraft Bench
by AER Control Systems
• Provides remote capture of dust, fumes, and gas/vapors
• Heavy duty 11 & 12ga construction with/powder coat finish
• Maximum table loads are 500lbs
• Removable grates for ease of cleaning
• Standard sizes are: 30x36, 30x48, 30x72, 48x96
• Custom sizes available
AER Powered Bench Spec Sheet PDF